Carroll Tools
|
|---|
|
DB50 KREG - FOREMAN SEMI-AUTOMATIC POCKET MACHINEWhen your production needs have outpaced a manual jig, look to the KREG Foreman Pocket Machine to get the job handled. This semi-automatic machine creates the same round sided hole as the Kreg Jig in a fraction of the time. Features 1/2" to 1 1/2" material capacity and quick drill bit changes. Entirely pneumatic powered drill motor and clamping cylinder for hands free clamping.
Specification: 1 second cycle time, 3/4 h.p. air motor, 90-120psi recommended, minimum of 5.3 cmf @ 90psi, 1/2" up to 1 1/2" material capacity,
(19" h x 13 5/8" W x 22 5/8" D) 6" table top height.
Price inclusive of VAT @ the current rate
|
Item # DB50
add
quantity
|
|
|
K2000 ProPack Kreg JIGThe ProPack is far and away the most popular Pocket Hole System as it contains everything you need to start building your project immediately. In addition to the patented K2000 jog, the ProPack now contains both the two-hole Rocket Jig and the one-hole Mini Kreg Jig, support wings for holding material level during drilling, adjustment blocks for centering the screws in 1/2", 3/4" and 1 1/2" material, 3/8" (KJD) step drill bit, depth collar to set drilling depth, 3" and 6" #2 square driver bits, Face Clamp to keep your materials aligned during assembly, 75 pcs of the 1 1/4" fine thread self tapping screw (SML-F125 - the ideal screw for joining 3/4" softwoods) and detailed instructions all contained in a sturdy plastic carry case. The ProPack is the only Pocket Hole System you'll need to handle your every wood joinery need.
Price inclusive of VAT @ the current rate
|
Item # K2000 ProPack
add
quantity
|
|
|
K2000 KREG JIGThe KREG K2000 is the most versatile pocket hole jig available today. The K2000 provides the flexibility needed to use pocket hole joinery in nearly any situation! Use this jig to build cabinets, entertainment centres, tables,chairs, decks, stairs angles, curves, window and door extensions, drawer boxes, rough 2X construction... you name it, the K2000 will likely handle it!
Less time, stronger joints, fewer clamps...give pocket hole joinery a try today!
Price inclusive of VAT @ the current rate
|
Item # K2000
add
quantity
|
|
|
K200 KREG SEMI-AUTOMATIC JIGThis semi-automatic pocket boring jig features a pneumatic clamp, drill bracket, spring loaded guide rods, flip stops and foot switch. Roughly twice as fast to use as the K2. Recommended drill speed 2000 rpm or higher. Air pressure 100 psi/7 bar required.
8 x 2.5 x 5 inches
Price: £350 each # K200
Price inclusive of VAT @ the current rate
|
Item # K200
add
quantity
|
|
|
K2 KREG PROFESSIONAL JIGThe Unique L-shaped design allows the jig to be fastened to a workbench leaving both hands free for easier and faster material positioning and drilling. With the double hole this greatly increases efficiency over jigs of primarily a portable nature. The best model for small to medium joinery workshops.
8 x 2.5 x 5 inches
Price: £88.00 each # K2
Price inclusive of VAT @ the current rate
|
Item # K2
add
quantity
|
|
|
KREG MINI JIG KITKMJ Mini KREG Jig
The body of the jig is tapered so it clamps easily in place. When you need a pocket hole in a tight spot or require maximum portability, the 'Mini' is the solution.
Ideal for the occasional user.
4 x 1 x 0.5 inches
Price inclusive of VAT @ the current rate
|
Item # MINI
add
quantity
|
|
|
R2 KREG (Rocket) JIGThe big brother of the 'Mini', the R2 is a double hole jig, saving time and effort in less re-positioning of the jig. The pack consists of the double hole jig (with hardened steel sleeve inserts), extension, step drillbit,quick release clamp, stop collar, allen key, square drive self tapping pan head screws and square driver bit. Like the 'Mini', the R2 is portable and can be used in those awkward to get at spots but with the added advantage of the ability to drill two holes without re-setting. A versatile and easy to use jig for perfect results.
Without extension: 4 x 2.5 x 1 inches
Price inclusive of VAT @ the current rate
Price: £65.00 each # R2
|
Item # R2
add
quantity
|
|